Coverage area and equipment for Express-AMU1

Express-AMU1 (Eutelsat36C) is our high capacity satellite in the most advanced Ka-band; providing uninterrupted coverage of the Russian Federation over the European part to areas of Western Siberia. 18 beams with high signal energy provide standard reception speeds of up to 40 Mbps. 

Orbital position for Express-AMU1: 36 deg, E.

*For more information on service availability at your planned installation location, please consult further with the konnect team or our partners.

For connection there are used satellite equipment kits manufactured by Gilat Satellite Networks:

Gemini-i right-hand circularly polarised satellite terminal kit (SkyEdgeII-c-0.76/Ka)*  *If required for certain applications, it is possible to configure the satellite equipment package of this model (contact the konnect team for more information).

Main parameters and characteristics:

• Maximum** transmission speed data:
  • • on reception - up to 40 Mbps;
    • in transmission - up to 10 Mbps.
• Effective antenna diameter: 0.76 m.
• Frequency range:
  • • on reception - 19.2-20.2 GHz;
    • in transmission - 29.4-30 GHz.
• Radiated transceiver power at single-decibel compression point (P1dB): 2W.
• Operating voltage: 100-240V 50 Hz.
• Power consumption: max. 50W.
• Operating temperature and relative humidity:
  • • for outdoor units: -40°C to +60°C, 0-100 %;
    • for indoor applications: 0°C to +50°C, 10-70 % (non-condensing).

**The actual data transmission speed depends on the quality of satellite coverage at the location of the terminal, network congestion and the selected tariff plan.

Supplied in package:

• Antenna system with 0.76 m reflector diameter, type 761 including:
  • Supporting and aligning bracket with clamps -1 pc,
  • Rear bracket - 1 pc,
  • Swivel plate - 1 pc,
  • Antenna reflector - 1 pc,
  • Transceiver boom - 1 pc,
  • Transmitter bracket - 1 pc;
• Ka-band transceiver: transceiver model AN8002 - 1 pc;
• Satellite router: SkyEdgeII-c Gemini-i - 1 pc.
• Extras:
  
  • Power adapter for router - 1 pc,
  • Ethernet cable (patch cord) - 1 m,
  • Dual radio-frequency cable with external F-connectors installed - 30 m,
  • F-connector for indoor installation - 2 pcs,
  • 1 pc bag with fasteners, including earthing cable - 1.5 m
  • 9/11 mm open-end spanner - 1 pc,
  • Quick Start Guide 1 pc,
  • DVD with installation instructions - 1 pc.